There are many things that factor into the decision to replace your tires. A flat tire or tire that is visibly damaged are obvious reasons. But what are the more common factors? The lifespan of a tire depends on a combination of influences including, the driver’s driving habits, climate, road conditions, tire design, and proper tire maintenance. The big three things to consider:
- 1. Tread Wear - Proper tread depth is essential to prevent hydroplaning and skidding. The minimum tread depth is 2/32nd of an inch (1.6 mm). If your tires don’t include General’s Replacement Tire Monitor, you can use a penny to check tread depth. Simply place the penny upside down into a tread groove. If you can see all of Lincoln’s head, it’s time for a new tire.
Advanced and unusual wear can reduce the ability of tread to properly grip the road in adverse conditions. Visually check tires for uneven wear, looking for high and low areas or unusually smooth areas and any signs of damage. Motorists should also check sidewalls for gouges, cuts, bulges or other irregularities.
- 2. Climate – The heat of summer and cold of winter can wreak havoc on your tires. Too much exposure to direct sunlight, UV rays, and/or heat, can cause cracking in your tires. If the vehicle is parked outside in the elements, and is not driven with frequency, this can accelerate the process. Extreme cold can also factor into tire wear.
- 3. Tire Age - Tires are designed and built to provide many thousands of miles of excellent service. For maximum benefit, tires must be maintained properly to avoid tire damage and abuse that may result in tire disablement. The service life of a tire is a cumulative function of the storage, stowing, rotation and service conditions, which a tire is subjected to throughout its life (load, speed, inflation pressure, road hazard injury, etc.). Since service conditions vary widely, accurately predicting the service life of any specific tire in chronological time is not possible.
General Tire is unaware of any technical data that supports a specific tire age for removal from service. However, as with other members of the tire and automotive industries, General Tire recommends that all tires (including spare tires) that were manufactured more than ten (10) years previous be removed from service and be replaced with new tires, even when tires appear to be usable from their external appearance and if the tread depth may have not reached the minimum wear out depth. Vehicle manufacturers may recommend a different chronological age at which a tire should be replaced based on their understanding of the specific vehicle application; General Tire recommends that any such instruction be followed. Consumers should note that most tires would have to be removed for tread wear-out or other causes before any proscribed removal period. A stated removal period in no way reduces the consumer's responsibility to replace tires as needed.
General Tire recommends that you regularly inspect your tires. An inspection of the tires should be incorporated during routine vehicle maintenance procedures. If tire damage is suspected or found, it should be carefully assessed by a trained tire specialist immediately.
